- Purposes and methods
- Subjects and Categories
- Rights of the subject concerned
Article Code: 104
The Barrel Cowl is the component that is installed at the top of a chimney system in accordance with the requirements of UNI EN 1856-1.
Thanks to its special design it keeps out rainwater ensuring the free flow of smoke and gases , even when installed in particularly windy areas.
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L050) thickness 0.5 mm
Outer Wall: Stainless Steel 304 BA (EN 1.4307 - L030) thickness 0.5 mm or 0.6 mm thick Copper.
Cap and Fixture Inside: Stainless Steel 304 BA (EN 1.4307 - L030), respectively, in thicknesses of 0.5 mm and 1.5 mm.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
Evacuation of the products of combustion resulting from wood-burning, multi-fuel, natural gas and diesel appliances. Especially indicated in fairly or very windy areas.
For the designation of the chimney system according to UNI EN 1856-1 the following is allowed:
- Dry (D)
- Wet (W)
- Positive (P1 = 200 Pa)
- Negative (N1 = 40 Pa).
- ≤ 200 ° C with silicone gasket and P1 = 200 P
|Dimensione||316 - 304||316 - Rame|
|Ø 80||€ 57,27||€ 105,57|
|Ø 100||€ 69,72||€ 128,52|
|Ø 130||€ 82,59||€ 152,24|
|Ø 150||€ 95,04||€ 175,19|
|Ø 180||€ 108,32||€ 199,67|
|Ø 200||€ 120,46||€ 222,06|
|Ø 250||€ 134,57||€ 248,06|
|Ø 300||€ 150,23||€ 276,93|
|Ø 350||€ 177,77||€ 327,70|
|Ø 400||€ 213,04||€ 392,71|
I prezzi riportati sul sito possono subire variazioni senza preavviso.
The technical data on the website are subject to change without notice.