Twin Wall Air

Accessories

Draught Regulator

Article Code: 114.A

Print

The Twin Wall AIR Draught regulator is an accessory that, under certain conditions, facilitates the draught in a flue. It must be placed at the base of the flue.

Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L050) 0.5 mm thick.

Outer Wall: Stainless Steel 304 BA (EN 1.4307 - L030) thickness 0.5 mm or Copper 0.6 mm thick.

Insulation: Annular space air 25mm thick.

Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.

Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.

Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.

The Draught Regulator must always be placed at the base of a flue. In certain circumstances, following the entry of outside air whose flow is mechanically adjustable, the increase in pressure facilitates the dispersal of smoke and gases.

Dimensione 304 - 304 316 - 304 316 - Rame
Ø 80 € 195,46 € 206,96 € 276,13
Ø 100 € 204,33 € 216,35 € 288,66
Ø 130 € 211,84 € 224,30 € 299,27
Ø 150 € 235,51 € 249,37 € 332,71
Ø 180 € 245,64 € 260,09 € 347,02
Ø 200 € 259,92 € 275,21 € 367,19
Ø 250 € 290,73 € 307,83 € 410,71
Ø 300 € 308,76 € 326,92 € 436,18
Ø 350 € 330,57 € 350,02 € 467,00
Ø 400 € 352,39 € 373,12 € 497,83

I prezzi riportati sul sito possono subire variazioni senza preavviso.

DiDeA
80130270
100150270
130180340
150200340
180230340
200250440
250300440
300350500
350400560
400450620

The technical data on the website are subject to change without notice.

Twin Wall Air

Related products