Single Wall

Accessories

Storm Collar

Article Code: 48.C

Print

The Storm Collar is an accessory that prevents the entry of rainwater where a Chimney System or a Flue penetrates the roof.

Materials Used: Stainless Steel 304 AISI (L20060) or Copper.

0.6 mm thick.

The Storm Collar is a flashing component used to prevent the entry of rainwater between the outer wall of the System and the point at which it penetrates the roof.

For the designation of the Chimney System in accordance with the requirements of UNI EN 1856-1 the following is permitted:

Operation: dry (D) or wet (W).

Pressure: Positive (P1 = 200 Pa), Negative (N1 = 40 Pa).

Operating temperature: ≤ 200 ° C with silicone gasket and P1 = 200 Pa; ≤ 600 ° C without silicone gasket and N1 = 40 Pa.

Dimensione 304 mm 0.5 316 mm 0.5
Ø 80 € 19,07 € 35,34
Ø 100 € 20,05 € 35,34
Ø 120 € 22,07 € 35,34
Ø 130 € 22,56 € 35,34
Ø 140 € 23,54 € 35,34
Ø 150 € 24,03 € 35,34
Ø 160 € 22,56 € 35,34
Ø 180 € 25,50 € 35,34
Ø 200 € 28,62 € 35,34
Ø 220 € 30,09 € 35,34
Ø 230 € 30,58 € 35,34
Ø 250 € 31,56 € 35,34
Ø 300 € 36,09 € 43,08
Ø 350 € 39,58 € 43,08
Ø 400 € 43,06 € 43,08
Ø 450 € 46,55 € 51,36

I prezzi riportati sul sito possono subire variazioni senza preavviso.

DiametroD1D2
8080180
100100200
120120220
130130230
140140240
150150250
160160260
180180280
200200300
220220320
230230330
250250350
300300400
350350450
400400500
450450550

The technical data on the website are subject to change without notice.

Related products