Twin Wall Air

Terminals

Conical Terminal

Article Code: 110

Print

The Conical Terminal is the component that is installed at the top of a twin wall AIR Chimney System in accordance with the requirements of UNI EN 1856-1 or a flue.

Thanks to its completely open design it does not create any resistance to the free flow of gases and smoke.

Wall: Stainless Steel 304 and 316L BA (EN 1.4404 - L050) thickness 0.5 mm

Cap: Stainless Steel 304 BA (EN 1.4307 - L030) thickness 0.5 mm or Copper thickness 0.6mm.

Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.

Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.

Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.

Evacuation of the products of combustion generated by wood-burning, multi-fuel, natural gas and diesel appliances. Being a completely open terminal it ensures the free flow of flue gases and smoke; it is a terminal that must be installed only in a system that has at its base a 90° Tee component with a condensate drain.

For the designation of the Chimney System in conformity with UNI EN 1856-1 the following is allowed:

operation:
- Dry (D)
- Wet (W)

pressures:
- Positive (P1 = 200 Pa)
- Negative (N1 = 40 Pa).

Operating temperatures:

- ≤ 200 ° C with silicone gasket and P1 = 200 P

Dimensione 316 - 304 316 - Rame
Ø 80 € 45,30 € 65,68
Ø 100 € 48,14 € 69,80
Ø 130 € 52,48 € 76,09
Ø 150 € 56,82 € 82,39
Ø 180 € 61,16 € 88,68
Ø 200 € 65,58 € 95,09
Ø 250 € 79,11 € 114,72
Ø 300 € 95,49 € 138,45
Ø 350 € 114,03 € 165,34
Ø 400 € 136,13 € 197,38

I prezzi riportati sul sito possono subire variazioni senza preavviso.

DiDeA
80130170
100150200
130180200
150200200
180230200
200250200
250300200
300350200
350400200
400450200

The technical data on the website are subject to change without notice.

Twin Wall Air

Related products