- Purposes and methods
- Subjects and Categories
- Rights of the subject concerned
Article Code: 84
The Stainless Steel Flue Liner series is made in stainless steel 0.1/0.12mm thick, 3000mm in length.
The Flex Liner comes in 3000mm lengths with a smooth interior and a corrugated exterior. Achieved through the helical winding of a strip of aluminium 0.10mm thick, corrugated longitudinally and crimped with the use of superimposed rollers in order to ensure consistency and seal in the product.
The FLEX Liner 3000 mm in length is used for lining a duct or restoring old masonry chimneys, in shafts or in technical rooms.
This series is suitable for use in roomsealed, open or condensing appliances. Intended use even in positive pressure (class P1 = 200 Pa) for temperatures up to 200 ° C by the use of a special joint, and for any combustible gas, combustible oil, wood or pellets.
It is not intended for use in outdoor installations.
It is not suitable for installation in places where there is a high concentration of halogen vapours such as in dry cleaners, hair and cosmetic salons, printing.
Product designation in accordance with EN 1856-2 Ducts and Flues
|Ø 80||€ 22,83|
|Ø 100||€ 28,45|
|Ø 120||€ 35,56|
|Ø 130||€ 37,81|
|Ø 140||€ 42,30|
|Ø 150||€ 45,67|
|Ø 160||€ 50,91|
|Ø 180||€ 55,02|
|Ø 200||€ 59,14|
|Ø 220||€ 68,12|
|Ø 250||€ 76,73|
|Ø 300||€ 86,47|
I prezzi riportati sul sito possono subire variazioni senza preavviso.
The technical data on the website are subject to change without notice.