- Purposes and methods
- Subjects and Categories
- Rights of the subject concerned
Article Code: 106
The Cap with Drain, is the key component for collecting and draining the condensates of a Chimney System in accordance with the requirements of UNI EN 1856 -1.
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meter.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
It comes with a threaded joint of the type 3/4 Gas, but the manufacturer does not supply the threaded stopper nor the drain taps.
Collection of the debris resulting from the combustion processes of gas boilers in Chimney Systems in accordance with the requirements of UNI EN 1856-1, of wood-burning or multifuel fireplaces, in Flues.
For the designation of the Chimney System according to UNI EN 1856-1 the following is allowed:
- Dry (D)
- Wet (W)
- Positive (P1 = 200 Pa)
- Negative (N1 = 40 Pa).
- ≤ 200 ° C with silicone gasket and P1 = 200 Pa -- ≤ 600° C without silicone gasket and N1 = 40 Pa
|Dimensione||304 - 304||316 - 304||316 - Rame|
|Ø 80||ND||€ 39,97||€ 65,44|
|Ø 100||ND||€ 40,27||€ 65,94|
|Ø 130||ND||€ 44,30||€ 72,54|
|Ø 150||ND||€ 48,00||€ 78,60|
|Ø 180||ND||€ 51,58||€ 84,46|
|Ø 200||ND||€ 55,14||€ 90,28|
|Ø 250||ND||€ 61,95||€ 101,44|
|Ø 300||ND||€ 72,18||€ 118,19|
|Ø 350||ND||€ 95,40||€ 156,22|
|Ø 400||ND||€ 122,43||€ 200,48|
I prezzi riportati sul sito possono subire variazioni senza preavviso.
The technical data on the website are subject to change without notice.