Data management
- Purposes and methods
- Subjects and Categories
- Rights of the subject concerned
More Info
APPLICATIONS Evacuation of the products of combustion (gases and smoke) and of ventilation (air).
Technical Data Sheet
Use Operation: -dry (D) or wet (W).
Pressure: - Positive (P1= 200 Pa) - Negative (N1=40 Pa). Working Temperature: - Max 200°c with silicone gasket and positive pressure - Max 600°c without silicone gasket and negative pressure TECHNICAL FEATURES Stainless Steel AISI 304, 316, 5, 6, 8 dc. Diameters available: 80, 100, 120, 130, 140, 150, 160, 180, 200, 220, 230, 250, 300, 350, 400, 450 Longitudinal TIG Welding. cold-moulded male/female forms. ACCESSORIES Triple-lipped silicone gaskets for joints well sealed. Locking Bands for joints well secured.
INSTALLATION INSTRUCTIONS
The Single Wall system, to be assembled properly, must follow the direction of the smoke and gases.
In order for this to happen:
1. the "Female End" of each component of the Chimney System, must always be facing up;
2. each "Female End" must be provided with a high temperature resistent silicone gasket, placed in its groove. When the gasket is put in place the tabs must always be facing downwards. The "Male End" should be lubricated before it is inserted in the "Female End";
3. each joint must be provided with a locking band. In applying the locking band, given its asymmetric nature, attention must be paid to what direction the diameters are printed in;
4. to ensure the system is stable a base support plate must be installed along with wall support bands every 3 m and an intermediate support plate at an intermediate height equal to 9 m in systems with diameters comprised between 80 mm and 200 mm, equal to 6 meters for a diameter greater than 200 mm;
5. the portion of the flue system that is above roof level must in no case exceed 2 m. It should be anchored where necessary with a guy wire bracket and steel cables;
6. in the case of an installation that is not vertical (oblique and / or horizontal sections) provide for the anchoring of the flue system to the wall through the application of a wall support band for each straight component or the accessory intended;
7. the installation of the whole flue system must be structured so as to ensure that each joint works in compression and never traction.
DESIGNATION ACCORDING TO UNI EN 1856
Chimney System EN 1856-1 T160 P1 W Vm L20050 O30 (with silicone gasket)
Chimney System EN 1856-1 T200 P1 D Vm L20050 O30 (with silicone gasket)
Chimney System EN 1856-1 T160 P1 W V2 L50050 O30 (with silicone gasket)
Chimney System EN 1856-1 T200 P1 D V2 L50050 O30 (with silicone gasket)
Chimney System EN 1856-1 T600 N1 W V2 L50050 G70 (without silicone gasket)
Chimney System EN 1856-1 T600 N1 D V2 L50050 G70 (without silicone gasket)
Ducts and Flue Pipes EN 1856-2 T160 P1 W Vm L20050 O30 (with silicone gasket)
Ducts and Flue Pipes EN 1856-2 T200 P1 D Vm L20050 O30 (with silicone gasket)
Ducts and Flue Pipes EN 1856-2 T160 P1 W V2 L50050 O30 (with silicone gasket)
Ducts and Flue Pipes EN 1856-2 T200 P1 D V2 L50050 O30 (with silicone gasket
Ducts and Flue Pipes EN 1856-2 T600 N1 W V2 L50050 G600 (without silicone gasket)
Ducts and Flue Pipes EN 1856-2 T600 N1 D V2 L50050 G600 (without silicone gasket)
TECHNICAL DATA SHEET
DIMENSIONS
Diameter [mm] 80 100 120 130 140 150 160 180 200 220 230 250 300 350 400 450
Weight [kg / m] 5 DC 0.98 1.23 1.48 1.60 1.73 1.85 1.97 2.22 2.47 2.70 2.84 3.10 3.70 4.30 4.90 5.50
6 Dc n.a. 1,48 1,70 1,90 2,00 2,20 2,30 2,65 2,95 3,25 3,40 3,65 4,45 5,20 5,95 6,70
8 Dc n.a. n.a. 2,35 2,60 2,75 2,95 3,15 3,55 3,95 4,35 4,55 4,95 5,85 6,90 7,90 8,90
MATERIALS
Type Stainless Steel AISI 316L Stainless Steel AISI 304L
Finishes BA BA
Thickness [mm] min. 0.5 min. 0.6 min. 0.8
Type of joint Male - Female with rib Bayonet Fitting
CONDITIONS OF USE
Combustibles Natural Gas - Diesel- Firewood
Temperature Maximum temperature [° C] 200 - with gasket
Maximum [° C] 600 - without gasket
Wet Yes- with Gasket No - without Gasket
Pressurized Yes - with Gasket No - without Gasket
CERTIFICATION
CE Marking EN 1856/1 Cert. N ° 0407 - CDP 574
EN 1856/2 Cert. N ° 0407 - CDP 574
Materials Compliance Decree. 37/08 - UNI TS11278 - EN 1443 - EN 1856-1 / 2
Product Certification Istituto GIORDANO
Testing Istituto GIORDANO
Quality System UNI EN ISO 9001 - Det Norske Veritas